Tools · Practice · Study planning

Learn by working through it.

Free electronics resources with clear assumptions, downloadable examples and checks you can run yourself.

Verilog + verification · Interactive practice

Synchronous FIFO boundary lab

Predict accepted reads and writes, inspect a clock-edge trace, then run the queue-model simulation checks and three deliberate faults.

Open FIFO practice →
VLSI + embedded · Practice

Timing and firmware, checked.

Explore setup/hold trade-offs and 8051 timer reloads. Includes worked examples, RTL and C exercises.

Open the practice lab →
Digital electronics · Interactive lab

Gates, adders and K-maps

Change binary inputs, trace the two half-adder carries and fill a Gray-code map. Includes a checked worked example and downloadable source/tests.

Open digital logic lab →
Embedded systems · Interactive tool

8051 timer reload calculator

Calculate timer counts, TH/TL values and rounding error. The model covers a single 16-bit Mode 1 interval; it does not replace board timing measurements.

Open calculator →
Digital design · SystemVerilog

4-bit RTL counter practice

Work through reset, enable, hold and wraparound with a downloadable testbench covering 64 state/control transitions.

Open counter exercise →
Digital design · Guide and source

T flip-flop and synchronous counter

Separate truth and excitation tables, then run the downloadable example. The published check covers 238 clock edges and includes a deliberate fault exercise.

Explore the worked guide →
Low-power design · Model exercise

Level shifters and isolation cells

Compare the jobs of level shifting and isolation, then test a digital clamp model. The exercise does not claim power-aware simulation or physical signoff.

Read the comparison →
Course planning · Browser worksheet

Compare course options

Record evidence about curriculum, access, support, price and terms for two course options. Export your entries to CSV before leaving the page.

Open comparison worksheet →